Merchandise

Push Upgrade Kit

Turn your Push 3 into a standalone instrument in just 30 minutes, following our step-by-step guide.

Contents: ā€ØIntelĀ® 11th Gen Coreā„¢ļø i3-1115G4 processor with 8GB of RAM and 2x WiFi antennas, lithium iron phosphate battery, 256GB SSD hard drive, heatsink, and all the tools and screws required for assembly.

Shipping weight: 1.8 kgā€Ø

Dimensions: 383 x 218 x 84 mm

USDĀ 1049

USB-Cable

Use Push as a control surface for Live on a computer by connecting it via USB.

Specifications:

USB-C to USB-C cable

Length: 100 cm / 39 in

The USB-cable is included in the Push 3 box.

USDĀ 15

Push MIDI Adapter

Use the Push MIDI Adapterā€™s 5-pin MIDI jack to send or receive MIDI data from an external instrument.

3.5 mm plug to Type A 5-pin MIDI jack

Compliant with the MIDI Manufacturers Association TRS MIDI Specification.

Length: 23 cm / 9 in

USDĀ 15

Push CV Adapter

Use the Push CV adapter to send CV from Push's pedal ports to your modular gear. With two adapters you can send up to four CV signals from Push.

Single 6.3 mm TRS plug to dual 3.5 mm TS jacks.

Length: 23 cm / 9 in

USDĀ 15

Push 3 Encoder Knob (set of 4)

Specifications:

Four Encoder Knobs

Height: 1.5 cm / 0.59 in

Diameter: 1.2 cm / 0.47 in

USDĀ 5

Push 3 Volume Knob

One Volume Knob. Height: 1 cm / 0.39, Diameter: 2.4 cm / 0.94 in.

USDĀ 3

Push 3 Swing & Tempo Knob

Specifications:

One Swing & Tempo Knob

Height: 1 cm / 0.39

Diameter: 1.6 cm / 0.63 in

USDĀ 3

Push 3 Power Supply Base

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Supply Base only works in combination with a Power Cable (sold separately).

Specifications:

Input: 100-240 V ~50/60 Hz, 2.0 A

Output: 20 V --- 3250 mA

C8 connector; non-polarized

Length: 150 cm / 59 in.

The Power Supply Base is included in the Push 3 box.

USDĀ 20

Power Cable (South Korea)

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).

Specifications:

Type C plug to C7 connector; non-polarized (KCC compliant)

Length: 150 cm / 59 in

One regional Power Cable is included in the Push 3 box.

USDĀ 5

Power Cable (China)

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).

Specifications:

Type A plug to C7 connector; non-polarized (CCC compliant)

Length: 150 cm / 59 in

One regional Power Cable is included in the Push 3 box.

USDĀ 5

Power Cable (AU/NZ)

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).

Specifications:

Type I plug to C7 connector; non-polarized

Length: 150 cm / 59 in

One regional Power Cable is included in the Push 3 box.

USDĀ 5

Power Cable (UK)

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).

Specifications:

Type G plug to C7 connector; non-polarized

Length: 150 cm / 59 in

One regional Power Cable is included in the Push 3 box.

USDĀ 5

Power Cable (Europe)

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).

Specifications:

Type C plug to C7 connector; non-polarized

Length: 150 cm / 59 in

One regional Power Cable is included in the Push 3 box.

USDĀ 5

Power Cable (North America, Japan)

Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.

Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).

Specifications:

Type A plug to C7 connector; non-polarized

Length: 150 cm / 59 in

One regional Power Cable is included in the Push 3 box.

USDĀ 5

Men T-Shirt Black

White Ableton logo on front, small "Ableton" on back. 100% organic cotton, classic cut.

USDĀ 30

Women's T-Shirt Grey

Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, regular fit.

USDĀ 30

Women's T-Shirt Black

White Ableton logo on front, small "Ableton" on back. 100% cotton, regular fit.

USDĀ 30

Men's T-Shirt Grey

Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, classic cut.

USDĀ 30

Hoodie Black Unisex

White Ableton logo on front. 85% organic cotton, 15% recycled polyester

USDĀ 40

Sweatshirt Grey Unisex

Black Ableton logo on front. 85% organic cotton, 15% recycled polyester

USDĀ 35

Push 2 Power Supply

Length 1.50m, 100-240VAC, 50/60Hz including 5 interchangeable adaptor tips for North/Central America & Japan, China, Europe, UK, Australia & New Zealand

USDĀ 25

Push 2 USB Cable

Length 1.40m, Ableton logo on right-angle connector

USDĀ 20

Push Adapter Bundle

Use the Push Adapter Bundle to easily connect Push to multiple pieces of MIDI and CV-compatible gear. Send MIDI data to or from even more devices with the bundleā€™s two MIDI Adapters, and transmit up to four CV signals using the two CV Adapters.

Original price USDĀ 60now USDĀ 48